How To Videos Glass 4 Classics

#0 Nathan shows how to fit the doors runners on the XR XT XW XY Ford Falcon

In this video Nathan explains how to use a locking strip tool and which one we sell and recommend.

Created with Wondershare Filmora

Created with Wondershare Filmora

In this video, Nathan runs you through the best way of making a template, for those of you who either don't have original glass, or have cut/chopped windscreen frames that require custom glass to be produced.

This process is critical for those of you who do require glass (both standard or custom) to be made. Accuracy is important throughout this process. In this video we happen to be using a windscreen frame from a 1935-1936 Ford, however the process remains the same (or very similar) to those of you with other vehicles that run a windscreen frame.

Nathan takes you through the correct way to mount the stainless steel window trim to your HK HT HG Holden Coupe Monaro rear quarter windows. This utilises the same product used by Holden from the factory and only takes minutes to do properly.

The is the same process required to mount the vent rubbers into EJ EH, HD HR, HK HT HG Holden's, 55-57 Chevrolet and many early Buick, Cadillac, Chevrolet, Oldsmobile, Pontiac production vehicles from the late 40s to the mid 60's.

Nathan takes you through the correct and most accurate/efficient way, to install glass in a 1937-1939 Ford (Beer Barrel) Pickup or 40-41 Ford Closed car windscreen frame.

Nathan takes you through the correct and safest way to disassemble your 2Dr and 4Dr hardtop (4Dr hardtop used in video) front door window frames so that you don’t damage the frames or the stainless trim pieces.